Furniture. Saturday , February 03rd , 2018 - 09:37:36 AM
In today's market place you can find a plethora of reproduced chairs, desks, tables, storage units, lighting, and accessories inspired by the industrial era, but if you truly want an industrial look, try searching for original items that can be found in salvage yards, flea markets and junk shops, and re-purpose them, or use them as is to add a bit of character and drama to a space. Many of today's manufacturers are designing pieces that really bring back the industrial era and while some of these items are pricey, they are great for adding historical character in today's spaces.
The same hot iron and gluing method is used in repairing marquetry. Lay a piece of paper over the missing section and rub with a soft pencil to get an outline of the area. Cut the paper to the pattern and stick it to the replacement piece of wood. Cut the wood slightly larger than the pattern and rub down with glass-paper until the exact fit can be obtained. Stick it into place with cold wood glue. On many antique furniture pieces the marquetry tends to lift through age and using the warm iron technique will heat the glue and the raised piece can be gently pressed down back into position. If dust has been trapped under the lifted section, it should be removed, cleaned and re-stuck into position.
Synthetic Rattan Furniture: Synthetic materials are usually regarded with suspicion when it comes to environmental sustainability, even when, as with rattan furniture, this is one of the main selling points employed by manufacturers and retailers.
Any content, trademark’s, or other material that might be found on the Symphony website that is not Symphony’s property remains the copyright of its respective owner/s. In no way does Symphony claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.