Furniture. Thursday , February 01st , 2018 - 20:58:42 PM
Fitting functional needs. Store-bought furniture can’t always do what you need to be done. Example, you do a lot of desk work and have one particular corner to accommodate desk, computer, supplies, etc. You may be lucky if you find sturdy ready-made pieces that will fit that corner and your work requirements get fulfilled.
Each of these materials possesses its own set of strengths and weaknesses, so home-owners are advised to check which one would best suit their needs before purchase, if at all possible. However, despite their differences, all of these materials also share a few common traits, such as weather resistance, sturdiness and low maintenance requirements, which make them firm favourites among British home-owners. This is a large part of the reason why rattan garden furniture continues to be the best-selling type of outdoor furniture across the western world, even despite the existence of the numerous other options listed in this article.
Wood veneers can be difficult to match. It is possible to buy new veneer strips, but they are generally thinner than the old hand-sawn veneers and do not always match in colour. It often pays to go to an auction to look for a broken oddment of furniture that has suitable veneers. To remove a veneer from its backing, first clean off any old polish with white spirit and carefully clean the varnish or wax. Place a damp cloth over the cleaned strip and press with a fairly hot iron. Keep the cloth damp. This melts the Scotch glue holding down the veneer, which can then be peeled off. The same technique is used to raise small areas on the antique piece, but use a soldering iron instead of an iron. Wipe all traces of glue while it is still warm. Dampen the veneer and flatten it between two pieces of wood for about 24 hours before use. Do not let it dry completely, for veneers must be re-laid while still damp and pliable. The replacement veneer should be slightly thicker than the existing one, to allow for sanding. Stick the new strip down with Scotch glue and apply a weight or clamp until the glue has completely set. Wax and polish to match the existing finish.
Any content, trademark’s, or other material that might be found on the Symphony website that is not Symphony’s property remains the copyright of its respective owner/s. In no way does Symphony claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.