Furniture. Thursday , February 15th , 2018 - 08:18:14 AM
Custom Made Furniture v/s Store Bought Furniture: Most people are often doubtful about the idea of getting custom made furniture for one very good reason: cost. It is often misunderstood that custom made furniture are expensive and have an ultra-high-end living which is totally not the concept. This should not be the deciding factor, as there can be many useful, better and practical benefits to custom furniture. A custom piece will solve certain problems that no ready-made equivalent can. Here are few points which states their difference:
Among the many different materials for outdoor furniture which can be farmed from a natural source are straw, bamboo, cane, and of course rattan, as well as certain types of reeds. These are all materials which have been used extensively throughout the centuries to make not only furniture, but also wicker baskets and other accessories, a trend which also continues to this day.
The same hot iron and gluing method is used in repairing marquetry. Lay a piece of paper over the missing section and rub with a soft pencil to get an outline of the area. Cut the paper to the pattern and stick it to the replacement piece of wood. Cut the wood slightly larger than the pattern and rub down with glass-paper until the exact fit can be obtained. Stick it into place with cold wood glue. On many antique furniture pieces the marquetry tends to lift through age and using the warm iron technique will heat the glue and the raised piece can be gently pressed down back into position. If dust has been trapped under the lifted section, it should be removed, cleaned and re-stuck into position.
Any content, trademark’s, or other material that might be found on the Symphony website that is not Symphony’s property remains the copyright of its respective owner/s. In no way does Symphony claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.